This is the latest recevied telemetry packets stored in our database for station/object OE6POD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774363116 | 940.3 hPa | 20.4 C deg | 0 % | 1017.5 hPa | 0 C deg |
| 1774361307 | 940.6 hPa | 22.6 C deg | 0 % | 1017.1 hPa | 0 C deg |
| 1774359492 | 940.8 hPa | 21.4 C deg | 0 % | 1017.8 hPa | 0 C deg |
| 1774357673 | 941 hPa | 21.5 C deg | 0 % | 1018 hPa | 0 C deg |
| 1774355872 | 941.3 hPa | 23.2 C deg | 0 % | 1017.7 hPa | 0 C deg |
| 1774354043 | 941.7 hPa | 24.9 C deg | 0 % | 1017.8 hPa | 0 C deg |
| 1774352229 | 941.9 hPa | 23.9 C deg | 0 % | 1018.2 hPa | 0 C deg |
| 1774350415 | 942.4 hPa | 24.5 C deg | 0 % | 1018.6 hPa | 0 C deg |
| 1774348598 | 942.8 hPa | 26.2 C deg | 0 % | 1018.6 hPa | 0 C deg |
| 1774346783 | 943 hPa | 25.8 C deg | 0 % | 1018.9 hPa | 0 C deg |
| 1774344980 | 943.4 hPa | 25.5 C deg | 0 % | 1019.4 hPa | 0 C deg |
| 1774343161 | 943.7 hPa | 28 C deg | 0 % | 1019 hPa | 0 C deg |
| 1774341345 | 944 hPa | 30.9 C deg | 0 % | 1018.6 hPa | 0 C deg |
| 1774339535 | 944.2 hPa | 30.5 C deg | 0 % | 1019 hPa | 0 C deg |
| 1774337716 | 944.3 hPa | 25.4 C deg | 0 % | 1020.5 hPa | 0 C deg |
| 1774335894 | 944.4 hPa | 22.6 C deg | 0 % | 1021.2 hPa | 0 C deg |
| 1774334079 | 944.5 hPa | 17.3 C deg | 0 % | 1022.9 hPa | 0 C deg |
| 1774284685 | 939.6 hPa | 11.8 C deg | 0 % | 1019.1 hPa | 0 C deg |
| 1774282836 | 939.2 hPa | 13 C deg | 0 % | 1018.4 hPa | 0 C deg |
| 1774281097 | 938.7 hPa | 12.7 C deg | 0 % | 1017.9 hPa | 0 C deg |
| 1774279214 | 938.3 hPa | 14.1 C deg | 0 % | 1017.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)