This is the latest recevied telemetry packets stored in our database for station/object 9A3XK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff* |
|---|---|---|---|---|---|
| 1750112712 | 53 Pkt | 390 Pkt | 0 Pkt | 2.79 Pcnt | 75 Pcnt |
| 1750112412 | 59 Pkt | 380 Pkt | 1 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750112112 | 45 Pkt | 380 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750111933 | 47 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750111812 | 46 Pkt | 390 Pkt | 1 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750111512 | 46 Pkt | 390 Pkt | 2 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750111212 | 50 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750110912 | 71 Pkt | 410 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750110612 | 72 Pkt | 400 Pkt | 1 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750110312 | 54 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750110193 | 65 Pkt | 380 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750110012 | 61 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750109712 | 59 Pkt | 380 Pkt | 2 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750109412 | 56 Pkt | 390 Pkt | 1 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750109112 | 58 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750108812 | 68 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750108512 | 47 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750108453 | 50 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750108212 | 44 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750107912 | 63 Pkt | 380 Pkt | 1 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750107612 | 60 Pkt | 380 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750107312 | 40 Pkt | 370 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750107012 | 55 Pkt | 400 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750106713 | 60 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
| 1750106712 | 60 Pkt | 390 Pkt | 0 Pkt | 2.8 Pcnt | 75 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)