APRS Track Direct

My position About ☰

reset

HS3XMW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3XMW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1778056943	1 Pkt	7 Pkt	-70 dBm	0.1 V
1778054957	2 Pkt	1 Pkt	-70 dBm	0.1 V
1778052970	0 Pkt	0 Pkt	-68 dBm	0.1 V
1778050984	0 Pkt	0 Pkt	-69 dBm	0 V
1778048997	0 Pkt	1 Pkt	-67 dBm	0.1 V
1778047011	2 Pkt	1 Pkt	-66 dBm	0.1 V
1778045024	2 Pkt	0 Pkt	-67 dBm	0 V
1778043038	1 Pkt	0 Pkt	-69 dBm	0.1 V
1778041051	0 Pkt	0 Pkt	-69 dBm	0.1 V
1778039065	1 Pkt	0 Pkt	-66 dBm	0.1 V
1778037078	2 Pkt	0 Pkt	-68 dBm	0.1 V
1778035092	2 Pkt	0 Pkt	-68 dBm	0.1 V
1778033105	1 Pkt	0 Pkt	-68 dBm	0 V
1778031119	2 Pkt	1 Pkt	-68 dBm	0.1 V
1778029132	2 Pkt	2 Pkt	-68 dBm	0.1 V
1778027146	6 Pkt	4 Pkt	-66 dBm	0 V
1778025159	2 Pkt	1 Pkt	-68 dBm	0.1 V
1778023173	3 Pkt	5 Pkt	-68 dBm	0.1 V
1778021186	2 Pkt	0 Pkt	-68 dBm	0 V
1778019199	2 Pkt	1 Pkt	-69 dBm	0.1 V
1778017213	2 Pkt	0 Pkt	-69 dBm	0.1 V
1778015227	2 Pkt	1 Pkt	-69 dBm	0 V
1778013240	3 Pkt	2 Pkt	-69 dBm	0.1 V
1778011253	2 Pkt	0 Pkt	-68 dBm	0 V
1778009267	2 Pkt	2 Pkt	-68 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)