This is the latest recevied telemetry packets stored in our database for station/object KF4TJY-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774469030 | 403 | 619 | 0 | 0 | 0 |
| 1774468911 | 403 | 617 | 0 | 0 | 0 |
| 1774463920 | 441 | 629 | 0 | 0 | 0 |
| 1774463799 | 439 | 629 | 0 | 0 | 0 |
| 1774463678 | 441 | 629 | 0 | 0 | 0 |
| 1774463220 | 442 | 626 | 0 | 0 | 0 |
| 1774463202 | 442 | 627 | 0 | 0 | 0 |
| 1774463083 | 442 | 626 | 0 | 0 | 0 |
| 1774462845 | 444 | 623 | 0 | 0 | 0 |
| 1774462726 | 446 | 622 | 0 | 0 | 0 |
| 1774462486 | 448 | 618 | 0 | 0 | 0 |
| 1774462370 | 451 | 617 | 0 | 0 | 0 |
| 1774462248 | 451 | 615 | 0 | 0 | 0 |
| 1774461772 | 455 | 607 | 0 | 0 | 0 |
| 1774450187 | 451 | 602 | 0 | 0 | 0 |
| 1774450068 | 452 | 600 | 0 | 0 | 0 |
| 1774437560 | 441 | 617 | 0 | 0 | 0 |
| 1774436947 | 434 | 607 | 0 | 0 | 0 |
| 1774436401 | 459 | 593 | 0 | 0 | 0 |
| 1774436299 | 456 | 591 | 0 | 0 | 0 |
| 1774436025 | 461 | 584 | 0 | 0 | 0 |
| 1774391500 | 443 | 621 | 0 | 0 | 0 |
| 1774391496 | 443 | 623 | 0 | 0 | 0 |
| 1774391479 | 442 | 623 | 0 | 0 | 0 |
| 1774391383 | 443 | 621 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)