This is the latest recevied telemetry packets stored in our database for station/object IZ5YLK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774066842 | 985 hPa | 2.1 C deg | 73.9 % | 1022.6 hPa | 0 C deg |
| 1774063200 | 985 hPa | 2.9 C deg | 70.8 % | 1022.5 hPa | 0 C deg |
| 1774059586 | 985.1 hPa | 3.6 C deg | 67.6 % | 1022.5 hPa | 0 C deg |
| 1774054124 | 985.7 hPa | 4.3 C deg | 65 % | 1023 hPa | 0 C deg |
| 1774052322 | 985.6 hPa | 4.8 C deg | 63.4 % | 1022.8 hPa | 0 C deg |
| 1774050510 | 985.7 hPa | 5 C deg | 62.1 % | 1022.9 hPa | 0 C deg |
| 1774043227 | 985.8 hPa | 6.2 C deg | 58.3 % | 1022.9 hPa | 0 C deg |
| 1774041421 | 985.7 hPa | 7.4 C deg | 53.6 % | 1022.6 hPa | 0 C deg |
| 1774037776 | 985.7 hPa | 8.3 C deg | 51.2 % | 1022.5 hPa | 0 C deg |
| 1774034154 | 985.5 hPa | 11 C deg | 40.5 % | 1022 hPa | 0 C deg |
| 1774032344 | 985.4 hPa | 11.9 C deg | 38.4 % | 1021.7 hPa | 0 C deg |
| 1774030523 | 985.2 hPa | 12.2 C deg | 36.9 % | 1021.5 hPa | 0 C deg |
| 1774026886 | 984.9 hPa | 14 C deg | 33.4 % | 1020.9 hPa | 0 C deg |
| 1774025074 | 984.7 hPa | 15.6 C deg | 31.2 % | 1020.4 hPa | 0 C deg |
| 1774019627 | 984.3 hPa | 21.2 C deg | 21.6 % | 1019.4 hPa | 0 C deg |
| 1774017807 | 984.3 hPa | 23.5 C deg | 21.5 % | 1019.1 hPa | 0 C deg |
| 1774016017 | 984.5 hPa | 25.4 C deg | 20.6 % | 1019.1 hPa | 0 C deg |
| 1774014182 | 984.6 hPa | 24.9 C deg | 21.7 % | 1019.3 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)