APRS Track Direct

My position About ☰

reset

HS6PAU-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PAU-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1774151927	33 ug/m3	48 ug/m3	58 ug/m3	-50 dBm	6.28 V
1774151605	32 ug/m3	46 ug/m3	55 ug/m3	-43 dBm	6.36 V
1774151283	30 ug/m3	44 ug/m3	53 ug/m3	-43 dBm	6.28 V
1774150961	33 ug/m3	47 ug/m3	57 ug/m3	-43 dBm	6.11 V
1774150624	33 ug/m3	48 ug/m3	57 ug/m3	-45 dBm	5.97 V
1774150442	33 ug/m3	47 ug/m3	57 ug/m3	-44 dBm	6.03 V
1774150120	34 ug/m3	48 ug/m3	60 ug/m3	-42 dBm	5.99 V
1774149798	34 ug/m3	49 ug/m3	60 ug/m3	-40 dBm	6.07 V
1774149476	34 ug/m3	51 ug/m3	62 ug/m3	-44 dBm	5.91 V
1774149154	36 ug/m3	50 ug/m3	62 ug/m3	-43 dBm	5.78 V
1774148832	34 ug/m3	50 ug/m3	61 ug/m3	-45 dBm	5.76 V
1774148510	37 ug/m3	51 ug/m3	63 ug/m3	-42 dBm	5.91 V
1774148188	39 ug/m3	54 ug/m3	66 ug/m3	-41 dBm	5.76 V
1774147866	36 ug/m3	51 ug/m3	62 ug/m3	-56 dBm	5.76 V
1774147544	35 ug/m3	52 ug/m3	63 ug/m3	-41 dBm	5.66 V
1774147222	35 ug/m3	50 ug/m3	62 ug/m3	-41 dBm	5.52 V
1774146900	39 ug/m3	54 ug/m3	65 ug/m3	-42 dBm	5.52 V
1774146578	40 ug/m3	54 ug/m3	66 ug/m3	-47 dBm	5.58 V
1774146256	38 ug/m3	54 ug/m3	66 ug/m3	-42 dBm	5.62 V
1774145933	36 ug/m3	51 ug/m3	63 ug/m3	-43 dBm	5.41 V
1774145611	36 ug/m3	52 ug/m3	66 ug/m3	-42 dBm	5.31 V
1774145289	37 ug/m3	52 ug/m3	64 ug/m3	-44 dBm	5.17 V
1774144967	39 ug/m3	53 ug/m3	67 ug/m3	-55 dBm	5.09 V
1774144645	39 ug/m3	53 ug/m3	64 ug/m3	-44 dBm	5.09 V
1774144323	37 ug/m3	53 ug/m3	65 ug/m3	-43 dBm	5 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)