APRS Track Direct

My position About ☰

reset

KL3RR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KL3RR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1774150971	12.45 volt	190 Pkt	10 Pkt	94 Pcnt	21.5 degC
1774149171	12.45 volt	160 Pkt	10 Pkt	92 Pcnt	21.5 degC
1774147371	12.45 volt	160 Pkt	10 Pkt	91 Pcnt	21.5 degC
1774145571	12.45 volt	160 Pkt	10 Pkt	91 Pcnt	21.5 degC
1774143771	12.45 volt	150 Pkt	10 Pkt	95 Pcnt	22 degC
1774141971	12.45 volt	170 Pkt	10 Pkt	95 Pcnt	21.5 degC
1774140171	12.45 volt	170 Pkt	10 Pkt	94 Pcnt	21.5 degC
1774138371	12.45 volt	160 Pkt	10 Pkt	94 Pcnt	21.5 degC
1774136571	12.45 volt	160 Pkt	10 Pkt	91 Pcnt	21.5 degC
1774134771	12.45 volt	190 Pkt	10 Pkt	90 Pcnt	21.5 degC
1774132971	12.45 volt	200 Pkt	10 Pkt	92 Pcnt	21 degC
1774131171	12.45 volt	180 Pkt	10 Pkt	92 Pcnt	21 degC
1774129371	12.45 volt	190 Pkt	10 Pkt	88 Pcnt	21 degC
1774127571	12.45 volt	190 Pkt	10 Pkt	88 Pcnt	21 degC
1774125771	12.45 volt	170 Pkt	10 Pkt	93 Pcnt	21 degC
1774123971	12.45 volt	170 Pkt	10 Pkt	91 Pcnt	21.5 degC
1774122171	12.45 volt	180 Pkt	10 Pkt	93 Pcnt	22.5 degC
1774120371	12.45 volt	170 Pkt	10 Pkt	95 Pcnt	22 degC
1774118571	12.45 volt	160 Pkt	10 Pkt	93 Pcnt	22 degC
1774116771	12.45 volt	180 Pkt	10 Pkt	93 Pcnt	22 degC
1774114971	12.45 volt	210 Pkt	10 Pkt	88 Pcnt	21.5 degC
1774113172	12.45 volt	210 Pkt	10 Pkt	87 Pcnt	21.5 degC
1774111372	12.45 volt	180 Pkt	10 Pkt	92 Pcnt	21 degC
1774109572	12.45 volt	180 Pkt	10 Pkt	95 Pcnt	21.5 degC
1774107772	12.45 volt	180 Pkt	10 Pkt	96 Pcnt	21.5 degC

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)