This is the latest recevied telemetry packets stored in our database for station/object SR6NPK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | T_ext* |
---|---|---|---|---|---|
1754106684 | 12.3 Volt | 720 Pkt | 0 Pkt | 74 Pcnt | 9.5 C |
1754106384 | 12.3 Volt | 720 Pkt | 0 Pkt | 74 Pcnt | 9.5 C |
1754106085 | 12.3 Volt | 730 Pkt | 0 Pkt | 74 Pcnt | 9.5 C |
1754106084 | 12.3 Volt | 730 Pkt | 0 Pkt | 74 Pcnt | 9.5 C |
1754105784 | 12.3 Volt | 740 Pkt | 0 Pkt | 75 Pcnt | 9 C |
1754105484 | 12.3 Volt | 740 Pkt | 0 Pkt | 75 Pcnt | 9 C |
1754105185 | 12.3 Volt | 750 Pkt | 0 Pkt | 76 Pcnt | 9 C |
1754105184 | 12.3 Volt | 750 Pkt | 0 Pkt | 76 Pcnt | 9 C |
1754104884 | 12.3 Volt | 760 Pkt | 0 Pkt | 76 Pcnt | 9 C |
1754104584 | 12.3 Volt | 760 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754104285 | 12.3 Volt | 760 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754104284 | 12.3 Volt | 760 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754103984 | 12.3 Volt | 770 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754103684 | 12.3 Volt | 780 Pkt | 0 Pkt | 78 Pcnt | 9.5 C |
1754103385 | 12.3 Volt | 780 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754103384 | 12.3 Volt | 780 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754103084 | 12.3 Volt | 780 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754102784 | 12.3 Volt | 780 Pkt | 0 Pkt | 77 Pcnt | 9.5 C |
1754102485 | 12.3 Volt | 780 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754102484 | 12.3 Volt | 780 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754102184 | 12.3 Volt | 780 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754101884 | 12.3 Volt | 770 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754101585 | 12.3 Volt | 760 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754101584 | 12.3 Volt | 760 Pkt | 0 Pkt | 76 Pcnt | 9.5 C |
1754101284 | 12.3 Volt | 750 Pkt | 0 Pkt | 77 Pcnt | 9 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
T_ext: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)