This is the latest recevied telemetry packets stored in our database for station/object YC1CWK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1768298606 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768297681 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768296756 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768295832 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768294908 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768293983 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768293059 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768292135 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768291211 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768290287 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768289363 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768288439 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768287515 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768286590 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768285666 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768284741 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768283818 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768282901 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768281968 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768281043 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768280119 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768279195 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768278271 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
| 1768277347 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1768276423 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 57 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)