This is the latest recevied telemetry packets stored in our database for station/object KA5WMY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290267 | 431 | 582 | 0 | 0 | 0 |
| 1732250740 | 424 | 609 | 0 | 0 | 0 |
| 1732248940 | 475 | 614 | 0 | 0 | 0 |
| 1732248900 | 476 | 614 | 0 | 0 | 0 |
| 1732248881 | 476 | 613 | 0 | 0 | 0 |
| 1732248811 | 477 | 613 | 0 | 0 | 0 |
| 1732248776 | 435 | 613 | 0 | 0 | 0 |
| 1732248723 | 477 | 612 | 0 | 0 | 0 |
| 1732248718 | 476 | 612 | 0 | 0 | 0 |
| 1732248712 | 437 | 612 | 0 | 0 | 0 |
| 1732248708 | 441 | 611 | 0 | 0 | 0 |
| 1732248696 | 461 | 611 | 0 | 0 | 0 |
| 1732248691 | 460 | 610 | 0 | 0 | 0 |
| 1732248486 | 472 | 608 | 0 | 0 | 0 |
| 1732248396 | 474 | 607 | 0 | 0 | 0 |
| 1732248307 | 474 | 606 | 0 | 0 | 0 |
| 1732248302 | 476 | 606 | 0 | 0 | 0 |
| 1732248292 | 474 | 605 | 0 | 0 | 0 |
| 1732248134 | 478 | 602 | 0 | 0 | 0 |
| 1732248129 | 476 | 602 | 0 | 0 | 0 |
| 1732247951 | 476 | 597 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)