APRS Track Direct

My position About ☰

reset

VK5ZX-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5ZX-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx 1h*	DEC 1h*	Temp*
1778061251	14.03 Volt	20 Pkt	76 Pcnt	16 C
1778059452	14.03 Volt	23 Pkt	81 Pcnt	16.5 C
1778059451	14.03 Volt	23 Pkt	81 Pcnt	16.5 C
1778057651	14.03 Volt	31 Pkt	79 Pcnt	16.5 C
1778055852	14.03 Volt	35 Pkt	78 Pcnt	17 C
1778055851	14.03 Volt	35 Pkt	78 Pcnt	17 C
1778054051	14.03 Volt	34 Pkt	81 Pcnt	17.5 C
1778052254	14.03 Volt	31 Pkt	80 Pcnt	18 C
1778052251	14.03 Volt	31 Pkt	80 Pcnt	18 C
1778050452	14.03 Volt	43 Pkt	80 Pcnt	18.5 C
1778048652	14.03 Volt	36 Pkt	84 Pcnt	18.5 C
1778048652	14.03 Volt	36 Pkt	84 Pcnt	18.5 C
1778046852	14.03 Volt	28 Pkt	86 Pcnt	18.5 C
1778045052	14.03 Volt	28 Pkt	81 Pcnt	18.5 C
1778045052	14.03 Volt	28 Pkt	81 Pcnt	18.5 C
1778043252	14.03 Volt	28 Pkt	79 Pcnt	19 C
1778041452	14.03 Volt	27 Pkt	81 Pcnt	19.5 C
1778041452	14.03 Volt	27 Pkt	81 Pcnt	19.5 C
1778039652	14.03 Volt	25 Pkt	80 Pcnt	20 C
1778037853	14.03 Volt	23 Pkt	81 Pcnt	20 C
1778037852	14.03 Volt	23 Pkt	81 Pcnt	20 C
1778036052	14.03 Volt	22 Pkt	85 Pcnt	20.5 C
1778034253	14.03 Volt	22 Pkt	87 Pcnt	20 C
1778034252	14.03 Volt	22 Pkt	87 Pcnt	20 C
1778032452	14.03 Volt	20 Pkt	85 Pcnt	18.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx 1h: 0, 1, 0

DIG 1h: 0, 1, 0

DEC 1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)