This is the latest recevied telemetry packets stored in our database for station/object DO5RC-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762275966 | 21.2 C | 948.13 hPa | 0 | 0 | 0 |
| 1762272432 | 19.3 C | 1027.75 hPa | 0 | 0 | 0 |
| 1762272146 | 19.4 C | 1026.88 hPa | 0 | 0 | 0 |
| 1762271918 | 19.4 C | 1027.75 hPa | 0 | 0 | 0 |
| 1762271753 | 19.5 C | 1024.63 hPa | 0 | 0 | 0 |
| 1762271564 | 19.6 C | 1023 hPa | 0 | 0 | 0 |
| 1762270498 | 20.6 C | 1029.88 hPa | 0 | 0 | 0 |
| 1762270319 | 20.7 C | 1025.38 hPa | 0 | 0 | 0 |
| 1762270138 | 20.8 C | 1028 hPa | 0 | 0 | 0 |
| 1762269826 | 21 C | 1028.5 hPa | 0 | 0 | 0 |
| 1762269207 | 21.3 C | 1027.25 hPa | 0 | 0 | 0 |
| 1762268869 | 21.2 C | 1026.75 hPa | 0 | 0 | 0 |
| 1762268672 | 21.2 C | 1027.5 hPa | 0 | 0 | 0 |
| 1762268488 | 21.2 C | 1026.63 hPa | 0 | 0 | 0 |
| 1762268282 | 21.1 C | 1028.25 hPa | 0 | 0 | 0 |
| 1762268082 | 21.1 C | 1026.38 hPa | 0 | 0 | 0 |
| 1762267708 | 21 C | 1025.5 hPa | 0 | 0 | 0 |
| 1762267475 | 21 C | 1030 hPa | 0 | 0 | 0 |
| 1762267273 | 21 C | 1026.13 hPa | 0 | 0 | 0 |
| 1762267050 | 21 C | 1024.63 hPa | 0 | 0 | 0 |
| 1762266825 | 20.9 C | 1026.88 hPa | 0 | 0 | 0 |
| 1762266391 | 20.6 C | 1028.25 hPa | 0 | 0 | 0 |
| 1762266135 | 20.3 C | 1028 hPa | 0 | 0 | 0 |
| 1762265858 | 19.9 C | 1026.38 hPa | 0 | 0 | 0 |
| 1762265684 | 19.5 C | 1027 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)