APRS Track Direct

My position About ☰

reset

ON0LGE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0LGE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274776	13.73 Volt	1010 Pkt	260 Pkt	67 Pcnt
1836274477	13.95 Volt	1020 Pkt	270 Pkt	67 Pcnt
1836274476	13.95 Volt	1020 Pkt	270 Pkt	67 Pcnt
1836274327	13.95 Volt	1030 Pkt	270 Pkt	67 Pcnt
1836274327	13.95 Volt	1030 Pkt	270 Pkt	67 Pcnt
1836274176	13.95 Volt	1010 Pkt	270 Pkt	67 Pcnt
1836273878	13.95 Volt	1030 Pkt	280 Pkt	68 Pcnt
1836273877	13.95 Volt	1030 Pkt	280 Pkt	68 Pcnt
1762291192	13.95 Volt	510 Pkt	160 Pkt	43 Pcnt
1762291191	13.95 Volt	510 Pkt	160 Pkt	43 Pcnt
1762290891	13.95 Volt	530 Pkt	170 Pkt	42 Pcnt
1762290592	13.73 Volt	540 Pkt	170 Pkt	43 Pcnt
1762290591	13.73 Volt	540 Pkt	170 Pkt	43 Pcnt
1762290291	13.95 Volt	550 Pkt	170 Pkt	42 Pcnt
1762289992	14.03 Volt	560 Pkt	180 Pkt	42 Pcnt
1762289991	14.03 Volt	560 Pkt	180 Pkt	42 Pcnt
1762289691	14.03 Volt	580 Pkt	190 Pkt	43 Pcnt
1762289392	13.95 Volt	610 Pkt	190 Pkt	45 Pcnt
1762289391	13.95 Volt	610 Pkt	190 Pkt	45 Pcnt
1762289091	13.95 Volt	630 Pkt	190 Pkt	46 Pcnt
1762288792	13.95 Volt	640 Pkt	190 Pkt	47 Pcnt
1762288791	13.95 Volt	640 Pkt	190 Pkt	47 Pcnt
1762288491	13.95 Volt	660 Pkt	200 Pkt	48 Pcnt
1762288192	14.03 Volt	670 Pkt	210 Pkt	49 Pcnt
1762288191	14.03 Volt	670 Pkt	210 Pkt	49 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)