This is the latest recevied telemetry packets stored in our database for station/object EL-W8LGX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765944001 | 0.01 | 0 | 1 | 0 | 0 |
| 1765943401 | 0 | 0 | 0 | 0 | 0 |
| 1765942801 | 0 | 0 | 0 | 0 | 0 |
| 1765942201 | 0 | 0 | 0 | 0 | 0 |
| 1765941601 | 0 | 0 | 0 | 0 | 0 |
| 1765941001 | 0 | 0 | 0 | 0 | 0 |
| 1765940401 | 0.02 | 0 | 1 | 0 | 0 |
| 1765939801 | 0 | 0 | 0 | 0 | 0 |
| 1765939201 | 0 | 0 | 0 | 0 | 0 |
| 1765938601 | 0 | 0 | 0 | 0 | 0 |
| 1765938001 | 0 | 0 | 0 | 0 | 0 |
| 1765937401 | 0.01 | 0 | 1 | 0 | 0 |
| 1765936801 | 0.01 | 0 | 1 | 0 | 0 |
| 1765936201 | 0 | 0 | 0 | 0 | 0 |
| 1765935601 | 0 | 0 | 0 | 0 | 0 |
| 1765935001 | 0 | 0 | 0 | 0 | 0 |
| 1765934401 | 0 | 0 | 0 | 0 | 0 |
| 1765933801 | 0 | 0 | 0 | 0 | 0 |
| 1765933201 | 0.02 | 0 | 1 | 0 | 0 |
| 1765932601 | 0 | 0 | 0 | 0 | 0 |
| 1765932001 | 0 | 0 | 0 | 0 | 0 |
| 1765931401 | 0 | 0 | 0 | 0 | 0 |
| 1765930801 | 0 | 0 | 0 | 0 | 0 |
| 1765930201 | 0 | 0 | 0 | 0 | 0 |
| 1765929601 | 0.02 | 0 | 1 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)