APRS Track Direct

My position About ☰

reset

TA4IB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4IB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1770110983	13 Pkt	0 Pkt	0 Pkt	-70 dBm	15.71 V
1770109759	442 Pkt	3 Pkt	0 Pkt	-70 dBm	15.79 V
1770107023	445 Pkt	3 Pkt	0 Pkt	-68 dBm	0.62 V
1770104285	393 Pkt	3 Pkt	0 Pkt	-68 dBm	0.76 V
1770101548	436 Pkt	7 Pkt	0 Pkt	-67 dBm	0.33 V
1770098809	404 Pkt	14 Pkt	0 Pkt	-67 dBm	0.18 V
1770096064	457 Pkt	7 Pkt	0 Pkt	-70 dBm	0.16 V
1770093324	12 Pkt	0 Pkt	0 Pkt	-70 dBm	0.31 V
1770093017	231 Pkt	1 Pkt	0 Pkt	-67 dBm	0.14 V
1770091515	380 Pkt	3 Pkt	0 Pkt	-69 dBm	0.14 V
1770088780	385 Pkt	3 Pkt	0 Pkt	-68 dBm	0.14 V
1770086043	383 Pkt	3 Pkt	0 Pkt	-70 dBm	0.16 V
1770083308	398 Pkt	3 Pkt	0 Pkt	-69 dBm	0.21 V
1770080570	410 Pkt	3 Pkt	0 Pkt	-69 dBm	0.21 V
1770077835	375 Pkt	4 Pkt	0 Pkt	-70 dBm	0.14 V
1770075100	390 Pkt	3 Pkt	0 Pkt	-70 dBm	0.25 V
1770072365	410 Pkt	4 Pkt	0 Pkt	-69 dBm	0.14 V
1770069628	9 Pkt	0 Pkt	0 Pkt	-69 dBm	0.16 V
1770069358	384 Pkt	1 Pkt	0 Pkt	-69 dBm	0.84 V
1770066623	406 Pkt	0 Pkt	0 Pkt	-66 dBm	0.21 V
1770063889	411 Pkt	4 Pkt	8 Pkt	-70 dBm	0.14 V
1770061152	495 Pkt	27 Pkt	9 Pkt	-68 dBm	1.13 V
1770058397	467 Pkt	1 Pkt	4 Pkt	-66 dBm	0.14 V
1770055662	498 Pkt	1 Pkt	3 Pkt	-69 dBm	1.42 V
1770052926	2 Pkt	3 Pkt	0 Pkt	-63 dBm	2.5 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)