APRS Track Direct

My position About ☰

reset

RDSPRT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object RDSPRT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Volt*	Rx1h*	Dg1h*	Eff1h*
1758215925	14.03 Volt	0 Pkt	0 Pkt	20 Pcnt
1758215325	14.03 Volt	10 Pkt	0 Pkt	25 Pcnt
1758214725	14.03 Volt	10 Pkt	0 Pkt	36 Pcnt
1758214125	14.03 Volt	20 Pkt	0 Pkt	39 Pcnt
1758213525	14.03 Volt	20 Pkt	0 Pkt	34 Pcnt
1758212925	14.03 Volt	20 Pkt	0 Pkt	27 Pcnt
1758212325	14.03 Volt	20 Pkt	10 Pkt	30 Pcnt
1758211725	14.03 Volt	20 Pkt	10 Pkt	34 Pcnt
1758211125	14.03 Volt	10 Pkt	0 Pkt	20 Pcnt
1758210527	14.03 Volt	10 Pkt	0 Pkt	19 Pcnt
1758210525	14.03 Volt	10 Pkt	0 Pkt	19 Pcnt
1758209925	14.03 Volt	10 Pkt	0 Pkt	16 Pcnt
1758209325	14.03 Volt	20 Pkt	10 Pkt	25 Pcnt
1758208725	14.03 Volt	10 Pkt	0 Pkt	17 Pcnt
1758208125	14.03 Volt	10 Pkt	0 Pkt	15 Pcnt
1758207525	14.03 Volt	10 Pkt	0 Pkt	17 Pcnt
1758206927	14.03 Volt	10 Pkt	0 Pkt	24 Pcnt
1758206925	14.03 Volt	10 Pkt	0 Pkt	24 Pcnt
1758206325	14.03 Volt	20 Pkt	0 Pkt	27 Pcnt
1758205725	14.03 Volt	10 Pkt	0 Pkt	20 Pcnt
1758205127	14.03 Volt	10 Pkt	0 Pkt	20 Pcnt
1758205125	14.03 Volt	10 Pkt	0 Pkt	20 Pcnt
1758204525	14.03 Volt	0 Pkt	0 Pkt	21 Pcnt
1758203925	14.03 Volt	0 Pkt	0 Pkt	14 Pcnt
1758203327	14.03 Volt	0 Pkt	0 Pkt	3 Pcnt

*Used Equation Coefficients:

Volt: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)