This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786728097 | 47.2 C | 4.48 % | 1021.13 hPa | 0 | 0 |
| 1786728084 | 47.2 C | 4.48 % | 1021.13 hPa | 0 | 0 |
| 1786727832 | 47.7 C | 4.4 % | 1021.38 hPa | 0 | 0 |
| 1786727719 | 47.9 C | 4.18 % | 1021.5 hPa | 0 | 0 |
| 1786727608 | 48.1 C | 3.9 % | 1021.25 hPa | 0 | 0 |
| 1786727006 | 49.4 C | 3.9 % | 1020.5 hPa | 0 | 0 |
| 1786726971 | 49.5 C | 3.48 % | 1021.13 hPa | 0 | 0 |
| 1786726948 | 49.5 C | 3.48 % | 1020.63 hPa | 0 | 0 |
| 1786726895 | 49.6 C | 3.7 % | 1021 hPa | 0 | 0 |
| 1786726876 | 49.8 C | 4.1 % | 1021 hPa | 0 | 0 |
| 1786726850 | 49.9 C | 3.91 % | 1020.63 hPa | 0 | 0 |
| 1786726839 | 49.8 C | 4.1 % | 1020.13 hPa | 0 | 0 |
| 1786726815 | 49.9 C | 3.91 % | 1020.63 hPa | 0 | 0 |
| 1786726802 | 49.9 C | 3.91 % | 1020.75 hPa | 0 | 0 |
| 1786726799 | 50.5 C | 3.35 % | 1022.88 hPa | 0 | 0 |
| 1786726799 | 50.2 C | 4.04 % | 1020.88 hPa | 0 | 0 |
| 1786726737 | 50 C | 3.33 % | 1020.88 hPa | 0 | 0 |
| 1786726675 | 50.2 C | 4.04 % | 1020.88 hPa | 0 | 0 |
| 1786726614 | 50.5 C | 3.35 % | 1022.88 hPa | 0 | 0 |
| 1786726601 | 50.5 C | 3.35 % | 1022.38 hPa | 0 | 0 |
| 1786726588 | 50.5 C | 3.35 % | 1020.75 hPa | 0 | 0 |
| 1786726527 | 50.9 C | 3.24 % | 1020.38 hPa | 0 | 0 |
| 1786726453 | 50.8 C | 4.56 % | 1020 hPa | 0 | 0 |
| 1786726416 | 50.8 C | 4.56 % | 1020.13 hPa | 0 | 0 |
| 1786726320 | 50.5 C | 3.07 % | 1020.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)