This is the latest recevied telemetry packets stored in our database for station/object IW5CTE-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753719478 | -47 dbm | 3.44 V | 0 | 0 | 0 |
| 1753718878 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753718277 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753717678 | -47 dbm | 3.44 V | 0 | 0 | 0 |
| 1753717078 | -47 dbm | 3.44 V | 0 | 0 | 0 |
| 1753716478 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753715878 | -53 dbm | 3.44 V | 0 | 0 | 0 |
| 1753715277 | -43 dbm | 3.44 V | 0 | 0 | 0 |
| 1753714678 | -47 dbm | 3.44 V | 0 | 0 | 0 |
| 1753714081 | -48 dbm | 3.44 V | 0 | 0 | 0 |
| 1753713478 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753712878 | -48 dbm | 3.44 V | 0 | 0 | 0 |
| 1753712278 | -49 dbm | 3.44 V | 0 | 0 | 0 |
| 1753711678 | -44 dbm | 3.44 V | 0 | 0 | 0 |
| 1753711078 | -44 dbm | 3.44 V | 0 | 0 | 0 |
| 1753710478 | -43 dbm | 3.44 V | 0 | 0 | 0 |
| 1753709878 | -44 dbm | 3.44 V | 0 | 0 | 0 |
| 1753709278 | -44 dbm | 3.44 V | 0 | 0 | 0 |
| 1753708677 | -46 dbm | 3.44 V | 0 | 0 | 0 |
| 1753708078 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753707477 | -43 dbm | 3.44 V | 0 | 0 | 0 |
| 1753706881 | -46 dbm | 3.44 V | 0 | 0 | 0 |
| 1753706278 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753705678 | -45 dbm | 3.44 V | 0 | 0 | 0 |
| 1753705077 | -43 dbm | 3.45 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)