This is the latest recevied telemetry packets stored in our database for station/object 9W2XPF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1836274401 | 3.9 | 4.6 | 11 | 1 | 12 |
| 1762224026 | 0.5 | 1.9 | 2 | 0 | 6 |
| 1762222827 | 1.9 | 3.6 | 8 | 0 | 11 |
| 1762220428 | 0.7 | 2 | 1 | 0 | 5 |
| 1762219228 | 0.2 | 1.5 | 0 | 0 | 4 |
| 1762216827 | 0.6 | 1.9 | 3 | 0 | 6 |
| 1762215627 | 0.8 | 1.9 | 2 | 0 | 5 |
| 1762213225 | 5 | 5.3 | 18 | 0 | 16 |
| 1762212025 | 6.2 | 7.1 | 21 | 0 | 22 |
| 1762209628 | 0.7 | 1.6 | 3 | 0 | 5 |
| 1762208432 | 3.5 | 3.8 | 13 | 0 | 10 |
| 1762206025 | 3.3 | 2 | 14 | 0 | 6 |
| 1762204825 | 1.4 | 2.6 | 5 | 0 | 7 |
| 1762202426 | 1 | 1.9 | 5 | 0 | 5 |
| 1762201226 | 1.1 | 2 | 4 | 0 | 6 |
| 1762198824 | 1.2 | 2.7 | 4 | 0 | 7 |
| 1762197624 | 1.2 | 1.9 | 3 | 0 | 5 |
| 1762195227 | 0.5 | 1.9 | 2 | 0 | 6 |
| 1762194027 | 0.2 | 2 | 1 | 0 | 5 |
| 1762191624 | 0.4 | 1.7 | 2 | 0 | 6 |
| 1762190425 | 0.7 | 2 | 2 | 0 | 5 |
| 1762188026 | 0.3 | 2.2 | 1 | 0 | 6 |
| 1762186826 | 0.6 | 2.2 | 2 | 0 | 6 |
| 1762184424 | 0.1 | 1.4 | 0 | 0 | 4 |
| 1762183224 | 0 | 1.3 | 0 | 0 | 4 |
*Used Equation Coefficients:
Avg 10m: 0, 1, 0
Avg 10m: 0, 1, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)