APRS Track Direct

My position About ☰

reset

E23JWE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1792070472	25 ug/m3	26 ug/m3	36 ug/m3	-28 dBm	6.99 V
1792068781	27 ug/m3	30 ug/m3	37 ug/m3	-35 dBm	7.24 V
1792066955	26 ug/m3	30 ug/m3	36 ug/m3	-36 dBm	7.28 V
1792065130	20 ug/m3	25 ug/m3	31 ug/m3	-36 dBm	7.3 V
1792063304	18 ug/m3	26 ug/m3	34 ug/m3	-40 dBm	7.2 V
1792061479	21 ug/m3	23 ug/m3	32 ug/m3	-35 dBm	6.93 V
1792059631	15 ug/m3	18 ug/m3	23 ug/m3	-34 dBm	7.14 V
1792057805	16 ug/m3	18 ug/m3	27 ug/m3	-36 dBm	7.22 V
1792055979	25 ug/m3	30 ug/m3	36 ug/m3	-36 dBm	7.16 V
1792054154	18 ug/m3	18 ug/m3	26 ug/m3	-35 dBm	7.24 V
1792052328	15 ug/m3	17 ug/m3	18 ug/m3	-35 dBm	7.1 V
1792050503	14 ug/m3	20 ug/m3	31 ug/m3	-40 dBm	7.1 V
1792048675	49 ug/m3	71 ug/m3	124 ug/m3	-36 dBm	7.16 V
1792046849	144 ug/m3	311 ug/m3	469 ug/m3	-38 dBm	7.26 V
1792045024	15 ug/m3	15 ug/m3	20 ug/m3	-40 dBm	6.99 V
1792043198	12 ug/m3	14 ug/m3	17 ug/m3	-36 dBm	6.99 V
1792041372	10 ug/m3	10 ug/m3	14 ug/m3	-35 dBm	7.32 V
1792039547	10 ug/m3	14 ug/m3	18 ug/m3	-36 dBm	7.34 V
1792037721	8 ug/m3	10 ug/m3	15 ug/m3	-38 dBm	7.28 V
1792035896	10 ug/m3	10 ug/m3	12 ug/m3	-36 dBm	7.34 V
1792034070	6 ug/m3	8 ug/m3	14 ug/m3	-44 dBm	7.28 V
1792032245	10 ug/m3	12 ug/m3	14 ug/m3	-35 dBm	7.08 V
1792030420	15 ug/m3	18 ug/m3	26 ug/m3	-36 dBm	7.32 V
1792028594	8 ug/m3	12 ug/m3	14 ug/m3	-36 dBm	7.28 V
1792026768	26 ug/m3	37 ug/m3	49 ug/m3	-36 dBm	6.99 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)