APRS Track Direct

My position About ☰

reset

9A3DZK-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3DZK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Temp*	A3*	A4*	A5*
1750112136	11.93 Volt	0 °C	0 None	0 None	0 None
1750111835	11.93 Volt	0 °C	0 None	0 None	0 None
1750111536	11.93 Volt	0 °C	0 None	0 None	0 None
1750111236	11.93 Volt	0 °C	0 None	0 None	0 None
1750110936	11.85 Volt	0 °C	0 None	0 None	0 None
1750110635	11.85 Volt	0 °C	0 None	0 None	0 None
1750110335	11.7 Volt	0 °C	0 None	0 None	0 None
1750110182	11.78 Volt	0 °C	0 None	0 None	0 None
1750109882	11.7 Volt	0 °C	0 None	0 None	0 None
1750109582	11.78 Volt	0 °C	0 None	0 None	0 None
1750109282	11.7 Volt	0 °C	0 None	0 None	0 None
1750108682	11.85 Volt	0 °C	0 None	0 None	0 None
1750108082	11.93 Volt	0 °C	0 None	0 None	0 None
1750107782	12.38 Volt	0 °C	0 None	0 None	0 None
1750107181	13.5 Volt	0 °C	0 None	0 None	0 None
1750106882	13.5 Volt	0 °C	0 None	0 None	0 None
1750106580	13.5 Volt	0 °C	0 None	0 None	0 None
1750106281	13.5 Volt	0 °C	0 None	0 None	0 None
1750105983	13.43 Volt	0 °C	0 None	0 None	0 None
1750099477	12 Volt	0 °C	0 None	0 None	0 None
1750098577	11.93 Volt	0 °C	0 None	0 None	0 None
1750098278	12 Volt	0 °C	0 None	0 None	0 None
1750097977	11.85 Volt	0 °C	0 None	0 None	0 None
1750097376	13.5 Volt	0 °C	0 None	0 None	0 None
1750097077	13.5 Volt	0 °C	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)