This is the latest recevied telemetry packets stored in our database for station/object DL1LAA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774110843 | 1022.4 hPa | 25.9 C deg | 0 % | 1029 hPa | 0 C deg |
| 1774109022 | 1022.2 hPa | 25.7 C deg | 0 % | 1028.9 hPa | 0 C deg |
| 1774107201 | 1022 hPa | 26.2 C deg | 0 % | 1028.7 hPa | 0 C deg |
| 1774105382 | 1022.1 hPa | 26 C deg | 0 % | 1028.8 hPa | 0 C deg |
| 1774103561 | 1022.4 hPa | 26 C deg | 0 % | 1029 hPa | 0 C deg |
| 1774101741 | 1022.6 hPa | 25.9 C deg | 0 % | 1029.3 hPa | 0 C deg |
| 1774099922 | 1022.6 hPa | 25.9 C deg | 0 % | 1029.3 hPa | 0 C deg |
| 1774098102 | 1022.8 hPa | 25.9 C deg | 0 % | 1029.5 hPa | 0 C deg |
| 1774096282 | 1022.8 hPa | 26.2 C deg | 0 % | 1029.4 hPa | 0 C deg |
| 1774094462 | 1023 hPa | 26.3 C deg | 0 % | 1029.7 hPa | 0 C deg |
| 1774092642 | 1023 hPa | 26 C deg | 0 % | 1029.7 hPa | 0 C deg |
| 1774090825 | 1023.2 hPa | 25.9 C deg | 0 % | 1029.8 hPa | 0 C deg |
| 1774089008 | 1023.3 hPa | 26.2 C deg | 0 % | 1030 hPa | 0 C deg |
| 1774087187 | 1023.2 hPa | 24.2 C deg | 0 % | 1029.9 hPa | 0 C deg |
| 1774085371 | 1023.3 hPa | 17.8 C deg | 0 % | 1030.2 hPa | 0 C deg |
| 1774030161 | 1022.7 hPa | 26.4 C deg | 0 % | 1029.3 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)