APRS Track Direct

☰

reset

IZ4VVL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4VVL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1792154504	69 Pkt	350 Pkt	1 Pkt	0.2 Pcnt	79 Pcnt
1792154204	57 Pkt	340 Pkt	1 Pkt	0.2 Pcnt	79 Pcnt
1792153904	59 Pkt	330 Pkt	2 Pkt	0.2 Pcnt	79 Pcnt
1792153604	54 Pkt	330 Pkt	2 Pkt	0.2 Pcnt	79 Pcnt
1792153304	55 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792153004	54 Pkt	330 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792152704	52 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792152404	48 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792152104	53 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792151804	57 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792151504	52 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792151204	45 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792150904	56 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792150604	54 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792150304	47 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792150004	55 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792149704	51 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792149404	46 Pkt	300 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792149104	50 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792148804	42 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792148504	48 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792148204	55 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792147904	58 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792147604	50 Pkt	320 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt
1792147304	51 Pkt	310 Pkt	0 Pkt	0.2 Pcnt	79 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by UW0WU-1, based on APRS Track Direct