APRS Track Direct

My position About ☰

reset

K2DLL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2DLL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732293418	15 Volt	1180 Pkt	80 Pkt	76 Pcnt
1732292517	15 Volt	1180 Pkt	80 Pkt	76 Pcnt
1732291616	14.7 Volt	1200 Pkt	80 Pkt	76 Pcnt
1732290715	15 Volt	1220 Pkt	80 Pkt	76 Pcnt
1732289816	15 Volt	1240 Pkt	80 Pkt	74 Pcnt
1732288914	15 Volt	1240 Pkt	70 Pkt	74 Pcnt
1732288013	14.93 Volt	1270 Pkt	70 Pkt	75 Pcnt
1732287112	15 Volt	1280 Pkt	70 Pkt	76 Pcnt
1732286213	15 Volt	1250 Pkt	70 Pkt	77 Pcnt
1732285310	15 Volt	1280 Pkt	70 Pkt	78 Pcnt
1732284409	15 Volt	1230 Pkt	80 Pkt	77 Pcnt
1732283509	15 Volt	1220 Pkt	80 Pkt	76 Pcnt
1732282611	15 Volt	1240 Pkt	90 Pkt	76 Pcnt
1732281707	15 Volt	1200 Pkt	100 Pkt	76 Pcnt
1732280806	15 Volt	1210 Pkt	100 Pkt	76 Pcnt
1732279905	15 Volt	1180 Pkt	110 Pkt	76 Pcnt
1732279004	15 Volt	1140 Pkt	110 Pkt	75 Pcnt
1732278103	14.93 Volt	1100 Pkt	100 Pkt	76 Pcnt
1732277203	15 Volt	1100 Pkt	90 Pkt	77 Pcnt
1732276302	15 Volt	1100 Pkt	80 Pkt	76 Pcnt
1732275401	15 Volt	1090 Pkt	80 Pkt	76 Pcnt
1732274500	15 Volt	1110 Pkt	80 Pkt	77 Pcnt
1732273599	15 Volt	1130 Pkt	80 Pkt	76 Pcnt
1732272698	15 Volt	1150 Pkt	80 Pkt	77 Pcnt
1732271797	15 Volt	1140 Pkt	70 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)