APRS Track Direct

My position About ☰

reset

9M4GJS-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4GJS-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1782642822	0.47 Load	55.31 DegC	302 Mb	835 Pkt	59 Pkt
1782642523	0.45 Load	55.31 DegC	303 Mb	766 Pkt	65 Pkt
1782642222	0.52 Load	55.31 DegC	308 Mb	758 Pkt	51 Pkt
1782641922	0.53 Load	55.84 DegC	309 Mb	827 Pkt	57 Pkt
1782641623	0.54 Load	55.84 DegC	305 Mb	871 Pkt	61 Pkt
1782641322	0.51 Load	55.84 DegC	309 Mb	863 Pkt	62 Pkt
1782641022	0.52 Load	55.84 DegC	316 Mb	1613 Pkt	62 Pkt
1782640722	0.45 Load	55.31 DegC	305 Mb	944 Pkt	63 Pkt
1782640423	0.51 Load	55.31 DegC	303 Mb	889 Pkt	72 Pkt
1782640122	0.54 Load	55.31 DegC	304 Mb	1026 Pkt	64 Pkt
1782639822	0.57 Load	55.31 DegC	311 Mb	1018 Pkt	61 Pkt
1782639523	0.53 Load	55.84 DegC	306 Mb	897 Pkt	64 Pkt
1782639222	0.53 Load	55.31 DegC	307 Mb	809 Pkt	60 Pkt
1782638922	0.45 Load	55.31 DegC	308 Mb	923 Pkt	63 Pkt
1782638623	0.47 Load	55.31 DegC	314 Mb	903 Pkt	61 Pkt
1782638323	0.45 Load	55.84 DegC	307 Mb	950 Pkt	62 Pkt
1782638022	0.43 Load	54.77 DegC	312 Mb	939 Pkt	51 Pkt
1782637722	0.45 Load	55.31 DegC	307 Mb	908 Pkt	60 Pkt
1782637423	0.48 Load	55.31 DegC	303 Mb	892 Pkt	59 Pkt
1782637122	0.49 Load	55.31 DegC	307 Mb	843 Pkt	68 Pkt
1782636823	0.54 Load	55.31 DegC	298 Mb	914 Pkt	63 Pkt
1782636523	0.51 Load	55.84 DegC	310 Mb	894 Pkt	66 Pkt
1782636222	0.49 Load	55.84 DegC	300 Mb	935 Pkt	58 Pkt
1782635922	0.56 Load	55.84 DegC	308 Mb	867 Pkt	55 Pkt
1782635623	0.55 Load	55.31 DegC	315 Mb	945 Pkt	61 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)