This is the latest recevied telemetry packets stored in our database for station/object IZ2URO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | RSSI* | Uptime* | Value4* | Value5* |
---|---|---|---|---|---|
1719426720 | 19.02 Volt | -63 dBm | 7 Hours | 0 | 0 |
1719426365 | 18.96 Volt | -63 dBm | 6.9 Hours | 0 | 0 |
1719426006 | 18.75 Volt | -63 dBm | 6.8 Hours | 0 | 0 |
1719425651 | 18.7 Volt | -63 dBm | 6.7 Hours | 0 | 0 |
1719425293 | 19.07 Volt | -61 dBm | 6.6 Hours | 0 | 0 |
1719424941 | 19.18 Volt | -63 dBm | 6.5 Hours | 0 | 0 |
1719424581 | 18.75 Volt | -63 dBm | 6.4 Hours | 0 | 0 |
1719424223 | 19.07 Volt | -61 dBm | 6.3 Hours | 0 | 0 |
1719423864 | 19.12 Volt | -63 dBm | 6.2 Hours | 0 | 0 |
1719423486 | 19.12 Volt | -61 dBm | 6.1 Hours | 0 | 0 |
1719423131 | 19.12 Volt | -63 dBm | 6 Hours | 0 | 0 |
1719422773 | 19.12 Volt | -65 dBm | 5.9 Hours | 0 | 0 |
1719422418 | 19.18 Volt | -65 dBm | 5.8 Hours | 0 | 0 |
1719422063 | 19.12 Volt | -63 dBm | 5.7 Hours | 0 | 0 |
1719421708 | 19.28 Volt | -63 dBm | 5.6 Hours | 0 | 0 |
1719421352 | 19.34 Volt | -61 dBm | 5.5 Hours | 0 | 0 |
1719420998 | 19.12 Volt | -63 dBm | 5.4 Hours | 0 | 0 |
1719420639 | 19.55 Volt | -63 dBm | 5.3 Hours | 0 | 0 |
1719420284 | 19.18 Volt | -61 dBm | 5.2 Hours | 0 | 0 |
1719419928 | 19.55 Volt | -65 dBm | 5.1 Hours | 0 | 0 |
1719419573 | 19.55 Volt | -65 dBm | 5 Hours | 0 | 0 |
1719419214 | 19.6 Volt | -63 dBm | 4.9 Hours | 0 | 0 |
1719418858 | 20.14 Volt | -63 dBm | 4.8 Hours | 0 | 0 |
1719418502 | 20.19 Volt | -61 dBm | 4.7 Hours | 0 | 0 |
1719418143 | 20.03 Volt | -63 dBm | 4.6 Hours | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
RSSI: 0, -1, 0
Uptime: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)