This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Rx10m* |
|---|---|---|---|---|---|
| 1786720348 | 12.6 Volt | 440 Pkt | 0 Pkt | 73 Pcnt | 66 Pkt |
| 1786719988 | 12.6 Volt | 470 Pkt | 0 Pkt | 73 Pcnt | 73 Pkt |
| 1786719628 | 12.6 Volt | 500 Pkt | 0 Pkt | 75 Pcnt | 57 Pkt |
| 1786719268 | 12.6 Volt | 540 Pkt | 0 Pkt | 78 Pcnt | 53 Pkt |
| 1786718908 | 12.6 Volt | 560 Pkt | 0 Pkt | 76 Pcnt | 61 Pkt |
| 1786718548 | 12.6 Volt | 570 Pkt | 0 Pkt | 74 Pcnt | 79 Pkt |
| 1786718188 | 12.6 Volt | 560 Pkt | 0 Pkt | 70 Pcnt | 73 Pkt |
| 1786717828 | 12.6 Volt | 530 Pkt | 0 Pkt | 65 Pcnt | 71 Pkt |
| 1786717468 | 12.6 Volt | 500 Pkt | 0 Pkt | 62 Pcnt | 62 Pkt |
| 1786717108 | 12.6 Volt | 480 Pkt | 0 Pkt | 61 Pcnt | 102 Pkt |
| 1786716748 | 12.6 Volt | 450 Pkt | 0 Pkt | 60 Pcnt | 119 Pkt |
| 1786716388 | 12.6 Volt | 400 Pkt | 0 Pkt | 56 Pcnt | 112 Pkt |
| 1786716028 | 12.6 Volt | 360 Pkt | 0 Pkt | 52 Pcnt | 109 Pkt |
| 1786715668 | 12.6 Volt | 310 Pkt | 0 Pkt | 49 Pcnt | 83 Pkt |
| 1786715308 | 12.6 Volt | 280 Pkt | 0 Pkt | 46 Pcnt | 66 Pkt |
| 1786714948 | 12.6 Volt | 260 Pkt | 0 Pkt | 45 Pcnt | 39 Pkt |
| 1786714588 | 12.6 Volt | 270 Pkt | 0 Pkt | 48 Pcnt | 41 Pkt |
| 1786714228 | 12.6 Volt | 290 Pkt | 0 Pkt | 51 Pcnt | 30 Pkt |
| 1786713868 | 12.6 Volt | 300 Pkt | 0 Pkt | 53 Pcnt | 31 Pkt |
| 1786713508 | 12.6 Volt | 320 Pkt | 0 Pkt | 56 Pcnt | 49 Pkt |
| 1786713148 | 12.6 Volt | 310 Pkt | 0 Pkt | 55 Pcnt | 48 Pkt |
| 1786712788 | 12.6 Volt | 320 Pkt | 0 Pkt | 57 Pcnt | 34 Pkt |
| 1786712428 | 12.6 Volt | 340 Pkt | 0 Pkt | 57 Pcnt | 44 Pkt |
| 1786712068 | 12.6 Volt | 330 Pkt | 0 Pkt | 57 Pcnt | 41 Pkt |
| 1786711708 | 12.6 Volt | 320 Pkt | 0 Pkt | 58 Pcnt | 51 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10m: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)