This is the latest recevied telemetry packets stored in our database for station/object EA2EZA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786735435 | 4.02 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786731832 | 4.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786728232 | 4.14 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786724631 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786721032 | 4.15 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786717429 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786713829 | 4.21 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786710228 | 4.2 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786706627 | 4.04 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786703023 | 3.89 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786699423 | 3.85 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786695823 | 3.81 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786692221 | 3.81 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786690237 | 3.78 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786682634 | 3.78 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786679028 | 3.83 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786675428 | 3.85 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786671828 | 3.85 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786668227 | 3.9 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786664627 | 3.94 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786661027 | 3.96 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786657426 | 3.99 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1786653826 | 4.01 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)