This is the latest recevied telemetry packets stored in our database for station/object OE2GXL-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774420417 | 948 hPa | 28.8 C deg | 26.1 % | 1007 hPa | 0 C deg |
| 1774418598 | 948.4 hPa | 26.9 C deg | 27.9 % | 1007.8 hPa | 0 C deg |
| 1774416784 | 948.9 hPa | 26.8 C deg | 28.3 % | 1008.3 hPa | 0 C deg |
| 1774414973 | 949.4 hPa | 26.8 C deg | 28.8 % | 1008.8 hPa | 0 C deg |
| 1774413155 | 949.5 hPa | 26.9 C deg | 29.2 % | 1008.9 hPa | 0 C deg |
| 1774411340 | 950.1 hPa | 26.9 C deg | 29.5 % | 1009.6 hPa | 0 C deg |
| 1774409526 | 950.7 hPa | 26.9 C deg | 29.9 % | 1010.2 hPa | 0 C deg |
| 1774407710 | 951 hPa | 26.9 C deg | 30.4 % | 1010.5 hPa | 0 C deg |
| 1774405897 | 951.5 hPa | 26.8 C deg | 31 % | 1011 hPa | 0 C deg |
| 1774404079 | 952 hPa | 26.9 C deg | 31.4 % | 1011.6 hPa | 0 C deg |
| 1774402264 | 952.2 hPa | 26.8 C deg | 31.7 % | 1011.8 hPa | 0 C deg |
| 1774400450 | 952.5 hPa | 26.7 C deg | 31.9 % | 1012.2 hPa | 0 C deg |
| 1774398632 | 952.9 hPa | 26.7 C deg | 32.2 % | 1012.6 hPa | 0 C deg |
| 1774396821 | 953.6 hPa | 26.5 C deg | 32.6 % | 1013.4 hPa | 0 C deg |
| 1774395005 | 953.7 hPa | 26.4 C deg | 33 % | 1013.5 hPa | 0 C deg |
| 1774393187 | 954.1 hPa | 26.2 C deg | 33.4 % | 1013.9 hPa | 0 C deg |
| 1774391375 | 954.3 hPa | 26 C deg | 33.9 % | 1014.2 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)