APRS Track Direct

My position About ☰

reset

IR2CW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2CW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1782514439	25 Pkt	170 Pkt	0 Pkt	1.03 Pcnt	38 Pcnt
1782514139	29 Pkt	170 Pkt	0 Pkt	1.03 Pcnt	39 Pcnt
1782513839	29 Pkt	170 Pkt	0 Pkt	1.03 Pcnt	42 Pcnt
1782513539	28 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	44 Pcnt
1782513240	29 Pkt	160 Pkt	1 Pkt	1.03 Pcnt	46 Pcnt
1782512940	18 Pkt	160 Pkt	1 Pkt	1.03 Pcnt	48 Pcnt
1782512640	23 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	53 Pcnt
1782512340	28 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	56 Pcnt
1782512040	23 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	60 Pcnt
1782511740	28 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	62 Pcnt
1782511440	25 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	65 Pcnt
1782511140	18 Pkt	160 Pkt	1 Pkt	1.03 Pcnt	68 Pcnt
1782510840	26 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	68 Pcnt
1782510540	27 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	69 Pcnt
1782510240	19 Pkt	160 Pkt	0 Pkt	1.03 Pcnt	69 Pcnt
1782509940	25 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	69 Pcnt
1782509640	23 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	70 Pcnt
1782509340	14 Pkt	150 Pkt	1 Pkt	1.03 Pcnt	72 Pcnt
1782509040	23 Pkt	150 Pkt	1 Pkt	1.03 Pcnt	70 Pcnt
1782508740	29 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	70 Pcnt
1782508440	30 Pkt	150 Pkt	0 Pkt	1.03 Pcnt	70 Pcnt
1782508140	29 Pkt	140 Pkt	0 Pkt	1.03 Pcnt	71 Pcnt
1782507840	24 Pkt	140 Pkt	0 Pkt	1.03 Pcnt	74 Pcnt
1782507540	19 Pkt	140 Pkt	1 Pkt	1.03 Pcnt	73 Pcnt
1782507240	25 Pkt	150 Pkt	1 Pkt	1.03 Pcnt	75 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)