This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779789109 | 33.7 C | 27.66 % | 1031.38 hPa | 0 | 0 |
| 1779788618 | 33.9 C | 26.8 % | 1031.63 hPa | 0 | 0 |
| 1779787055 | 29.3 C | 35.42 % | 1031.75 hPa | 0 | 0 |
| 1779785307 | 28.4 C | 43.17 % | 1031 hPa | 0 | 0 |
| 1779776277 | 28.3 C | 42.87 % | 1032.75 hPa | 0 | 0 |
| 1779767247 | 28.1 C | 44.4 % | 1032.5 hPa | 0 | 0 |
| 1779758217 | 28.2 C | 43.07 % | 1032.88 hPa | 0 | 0 |
| 1779749187 | 29 C | 42.04 % | 1032.5 hPa | 0 | 0 |
| 1779740157 | 29.2 C | 41.42 % | 1032.25 hPa | 0 | 0 |
| 1779735349 | 26 C | 43.35 % | 1023.63 hPa | 0 | 0 |
| 1779734913 | 26.2 C | 42.02 % | 1023.5 hPa | 0 | 0 |
| 1779734535 | 26.3 C | 41.42 % | 1025.88 hPa | 0 | 0 |
| 1779734072 | 26.5 C | 39.5 % | 1028 hPa | 0 | 0 |
| 1779730203 | 28 C | 33.35 % | 1030.75 hPa | 0 | 0 |
| 1779729492 | 27.9 C | 35.58 % | 1030.13 hPa | 0 | 0 |
| 1779729111 | 27.5 C | 36.25 % | 1030.25 hPa | 0 | 0 |
| 1779728624 | 28.7 C | 34.16 % | 1030.75 hPa | 0 | 0 |
| 1779727507 | 29.3 C | 33.35 % | 1030.13 hPa | 0 | 0 |
| 1779727045 | 30.1 C | 36.99 % | 1023.38 hPa | 0 | 0 |
| 1779726440 | 32.1 C | 30.73 % | 1029.13 hPa | 0 | 0 |
| 1779722384 | 33.5 C | 26.04 % | 1029.25 hPa | 0 | 0 |
| 1779717715 | 31.2 C | 29.23 % | 1029.13 hPa | 0 | 0 |
| 1779717406 | 29.4 C | 30.48 % | 959 hPa | 0 | 0 |
| 1779706105 | 28.7 C | 41.97 % | 1031.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)