APRS Track Direct

My position About ☰

reset

YB1CAS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1CAS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274239	29 Pkt	0 Pkt	-49 dBm	5.66 V
1836274062	24 Pkt	0 Pkt	-40 dBm	5.66 V
1766277775	36 Pkt	1 Pkt	-45 dBm	5.66 V
1766276845	39 Pkt	1 Pkt	-44 dBm	5.66 V
1766275916	15 Pkt	1 Pkt	-45 dBm	5.66 V
1766275915	15 Pkt	1 Pkt	-44 dBm	5.66 V
1766274992	43 Pkt	1 Pkt	-43 dBm	5.66 V
1766274060	40 Pkt	2 Pkt	-45 dBm	5.66 V
1766273128	34 Pkt	1 Pkt	-44 dBm	5.66 V
1766273127	34 Pkt	1 Pkt	-43 dBm	5.66 V
1766272198	41 Pkt	1 Pkt	-42 dBm	5.66 V
1766271267	41 Pkt	0 Pkt	-42 dBm	5.68 V
1766270333	46 Pkt	0 Pkt	-44 dBm	5.66 V
1766269399	36 Pkt	1 Pkt	-43 dBm	5.66 V
1766268469	49 Pkt	1 Pkt	-43 dBm	5.68 V
1766267536	35 Pkt	1 Pkt	-44 dBm	5.66 V
1766266607	50 Pkt	1 Pkt	-43 dBm	5.66 V
1766265675	41 Pkt	1 Pkt	-42 dBm	5.66 V
1766264743	50 Pkt	1 Pkt	-43 dBm	5.66 V
1766263809	46 Pkt	1 Pkt	-43 dBm	5.66 V
1766262873	52 Pkt	1 Pkt	-43 dBm	5.66 V
1766261937	50 Pkt	2 Pkt	-42 dBm	5.66 V
1766261004	41 Pkt	0 Pkt	-42 dBm	5.66 V
1766261004	41 Pkt	0 Pkt	-44 dBm	5.66 V
1766260073	3 Pkt	0 Pkt	-41 dBm	5.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)