This is the latest recevied telemetry packets stored in our database for station/object PU2PPB-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770123901 | 0 | 13 | 0 | 1 | 0 |
| 1770123301 | 0 | 4 | 0 | 1 | 0 |
| 1770122701 | 0 | 845 | 0 | 4 | 0 |
| 1770122101 | 0 | 672 | 0 | 3 | 0 |
| 1770121501 | 0 | 0 | 0 | 0 | 0 |
| 1770120901 | 0 | 3 | 0 | 1 | 0 |
| 1770120301 | 0 | 13 | 0 | 1 | 0 |
| 1770119701 | 0 | 4 | 0 | 1 | 0 |
| 1770119101 | 0 | 84 | 0 | 3 | 0 |
| 1770118501 | 0 | 706 | 0 | 7 | 0 |
| 1770117901 | 0 | 962 | 0 | 9 | 0 |
| 1770117301 | 0 | 970 | 0 | 6 | 0 |
| 1770116701 | 0 | 930 | 0 | 11 | 0 |
| 1770116101 | 0 | 920 | 0 | 15 | 0 |
| 1770115501 | 0 | 953 | 0 | 7 | 0 |
| 1770114901 | 0 | 918 | 0 | 15 | 0 |
| 1770114301 | 0 | 864 | 0 | 8 | 0 |
| 1770113701 | 0 | 966 | 0 | 7 | 0 |
| 1770113101 | 0 | 945 | 0 | 10 | 0 |
| 1770112501 | 0 | 593 | 0 | 5 | 0 |
| 1770111901 | 0 | 889 | 0 | 7 | 0 |
| 1770111301 | 0 | 930 | 0 | 10 | 0 |
| 1770110701 | 0 | 954 | 0 | 7 | 0 |
| 1770110101 | 0 | 747 | 0 | 8 | 0 |
| 1770109512 | 0 | 63 | 0 | 6 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)