This is the latest recevied telemetry packets stored in our database for station/object OK9MAD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU.Temp* | Env.Temp* | Env.Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274794 | 41.9 Deg.C | 21.6 Deg.C | 56.2 Perc | 0 | 0 |
| 1836274494 | 41.9 Deg.C | 21.7 Deg.C | 56.1 Perc | 0 | 0 |
| 1836274344 | 41.9 Deg.C | 21.6 Deg.C | 56.1 Perc | 0 | 0 |
| 1836274194 | 42.4 Deg.C | 21.8 Deg.C | 55.8 Perc | 0 | 0 |
| 1836273893 | 42.4 Deg.C | 21.8 Deg.C | 55.8 Perc | 0 | 0 |
| 1766205466 | 31.1 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766205168 | 31.1 Deg.C | 9.7 Deg.C | 66.3 Perc | 0 | 0 |
| 1766204866 | 30.6 Deg.C | 9.7 Deg.C | 66.2 Perc | 0 | 0 |
| 1766204566 | 30.6 Deg.C | 9.7 Deg.C | 66.1 Perc | 0 | 0 |
| 1766204266 | 31.1 Deg.C | 9.7 Deg.C | 66.2 Perc | 0 | 0 |
| 1766203966 | 31.1 Deg.C | 9.8 Deg.C | 66.4 Perc | 0 | 0 |
| 1766203666 | 31.1 Deg.C | 9.8 Deg.C | 66.4 Perc | 0 | 0 |
| 1766203369 | 31.1 Deg.C | 9.8 Deg.C | 66.4 Perc | 0 | 0 |
| 1766203065 | 31.1 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766202765 | 31.1 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766202466 | 31.1 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766202187 | 31.1 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766201866 | 30.6 Deg.C | 9.7 Deg.C | 66.4 Perc | 0 | 0 |
| 1766201566 | 31.1 Deg.C | 9.7 Deg.C | 66.3 Perc | 0 | 0 |
| 1766201265 | 30.6 Deg.C | 9.7 Deg.C | 66.3 Perc | 0 | 0 |
| 1766200972 | 31.1 Deg.C | 9.7 Deg.C | 66.3 Perc | 0 | 0 |
| 1766200665 | 31.1 Deg.C | 9.7 Deg.C | 66.3 Perc | 0 | 0 |
| 1766200365 | 31.1 Deg.C | 9.7 Deg.C | 66.2 Perc | 0 | 0 |
| 1766200066 | 31.1 Deg.C | 9.7 Deg.C | 66.1 Perc | 0 | 0 |
| 1766199766 | 31.1 Deg.C | 9.7 Deg.C | 66.2 Perc | 0 | 0 |
*Used Equation Coefficients:
CPU.Temp: 0, 1, 0
Env.Temp: 0, 1, 0
Env.Hum: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)