APRS Track Direct

My position About ☰

reset

ELKGRV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ELKGRV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1778044080	13.8 Volt	370 Pkt	0 Pkt	77 Pcnt
1778040480	13.8 Volt	340 Pkt	0 Pkt	81 Pcnt
1778036880	13.8 Volt	360 Pkt	0 Pkt	85 Pcnt
1778033280	13.8 Volt	470 Pkt	0 Pkt	77 Pcnt
1778029681	13.8 Volt	420 Pkt	0 Pkt	77 Pcnt
1778026080	13.8 Volt	380 Pkt	0 Pkt	81 Pcnt
1778022481	13.8 Volt	370 Pkt	0 Pkt	81 Pcnt
1778018881	13.8 Volt	420 Pkt	10 Pkt	74 Pcnt
1778015281	13.8 Volt	590 Pkt	0 Pkt	73 Pcnt
1778011681	13.8 Volt	420 Pkt	0 Pkt	82 Pcnt
1778008082	13.8 Volt	410 Pkt	0 Pkt	81 Pcnt
1778008081	13.8 Volt	410 Pkt	0 Pkt	81 Pcnt
1778004481	13.8 Volt	440 Pkt	0 Pkt	76 Pcnt
1778000881	13.8 Volt	380 Pkt	0 Pkt	83 Pcnt
1777997281	13.8 Volt	510 Pkt	10 Pkt	84 Pcnt
1777993681	13.8 Volt	390 Pkt	10 Pkt	81 Pcnt
1777990081	13.8 Volt	370 Pkt	0 Pkt	80 Pcnt
1777986481	13.8 Volt	360 Pkt	0 Pkt	84 Pcnt
1777982881	13.8 Volt	320 Pkt	0 Pkt	85 Pcnt
1777979281	13.8 Volt	320 Pkt	0 Pkt	83 Pcnt
1777975681	13.8 Volt	360 Pkt	0 Pkt	87 Pcnt
1777972082	13.8 Volt	350 Pkt	0 Pkt	87 Pcnt
1777968482	13.8 Volt	350 Pkt	0 Pkt	85 Pcnt
1777964882	13.8 Volt	310 Pkt	0 Pkt	84 Pcnt
1777964882	13.8 Volt	310 Pkt	0 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)