This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-90. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1780175483 | 969.5 hPa | 27.3 C deg | 41.4 % | 389 - | 0 C deg |
| 1780170046 | 969.9 hPa | 27.6 C deg | 41.4 % | 378 - | 0 C deg |
| 1780164596 | 969.9 hPa | 27.2 C deg | 40.2 % | 383 - | 0 C deg |
| 1780162781 | 970 hPa | 27.3 C deg | 40.2 % | 385 - | 0 C deg |
| 1780160966 | 970.1 hPa | 27.1 C deg | 40.3 % | 407 - | 0 C deg |
| 1780159151 | 970.1 hPa | 26.7 C deg | 41 % | 402 - | 0 C deg |
| 1780151888 | 971.1 hPa | 26 C deg | 41.2 % | 420 - | 0 C deg |
| 1780146442 | 972 hPa | 26.9 C deg | 39.6 % | 416 - | 0 C deg |
| 1780142816 | 972.7 hPa | 27 C deg | 40.3 % | 407 - | 0 C deg |
| 1780141003 | 972.9 hPa | 27.1 C deg | 40.6 % | 410 - | 0 C deg |
| 1780135554 | 973.7 hPa | 26.8 C deg | 43.4 % | 441 - | 0 C deg |
| 1780133741 | 973.9 hPa | 26.1 C deg | 45.4 % | 436 - | 0 C deg |
| 1780131925 | 973.9 hPa | 24.7 C deg | 48 % | 440 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)