APRS Track Direct

My position About ☰

reset

EA5IHI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5IHI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774125184	0 Pkt	1 Pkt	0 Pkt	-51 dBm	12.59 V
1774124562	2 Pkt	1 Pkt	0 Pkt	-49 dBm	13.1 V
1774123940	1 Pkt	1 Pkt	0 Pkt	-49 dBm	12.47 V
1774123318	3 Pkt	2 Pkt	0 Pkt	-51 dBm	13.08 V
1774122696	6 Pkt	2 Pkt	0 Pkt	-60 dBm	12.55 V
1774122073	3 Pkt	0 Pkt	0 Pkt	-49 dBm	12.35 V
1774121451	1 Pkt	0 Pkt	0 Pkt	-49 dBm	12.1 V
1774120829	1 Pkt	0 Pkt	0 Pkt	-50 dBm	12.57 V
1774120207	1 Pkt	2 Pkt	0 Pkt	-57 dBm	12.39 V
1774119585	4 Pkt	1 Pkt	0 Pkt	-50 dBm	12.86 V
1774118962	5 Pkt	2 Pkt	0 Pkt	-51 dBm	12.08 V
1774118340	2 Pkt	2 Pkt	0 Pkt	-49 dBm	12.45 V
1774117718	3 Pkt	1 Pkt	0 Pkt	-57 dBm	12.2 V
1774117096	3 Pkt	2 Pkt	0 Pkt	-54 dBm	12.24 V
1774116472	1 Pkt	1 Pkt	0 Pkt	-51 dBm	12.69 V
1774115850	6 Pkt	1 Pkt	1 Pkt	-52 dBm	12.47 V
1774115227	2 Pkt	3 Pkt	3 Pkt	-49 dBm	12.84 V
1774114605	2 Pkt	1 Pkt	7 Pkt	-50 dBm	12.22 V
1774113983	5 Pkt	1 Pkt	2 Pkt	-59 dBm	12.65 V
1774113360	3 Pkt	2 Pkt	1 Pkt	-58 dBm	12.08 V
1774112738	4 Pkt	1 Pkt	2 Pkt	-58 dBm	12.3 V
1774112116	4 Pkt	2 Pkt	3 Pkt	-59 dBm	12.37 V
1774111494	5 Pkt	2 Pkt	2 Pkt	-58 dBm	12.22 V
1774110872	2 Pkt	1 Pkt	3 Pkt	-59 dBm	12.2 V
1774110250	9 Pkt	2 Pkt	5 Pkt	-56 dBm	13.21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)