This is the latest recevied telemetry packets stored in our database for station/object DO0AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762330558 | 4.9 deg C | 88.6 % | 1026.1 hPa | 0 | 0 |
| 1762329657 | 4.8 deg C | 88.2 % | 1026.2 hPa | 0 | 0 |
| 1762328757 | 4.7 deg C | 88.6 % | 1026.2 hPa | 0 | 0 |
| 1762327857 | 4.6 deg C | 89.1 % | 1026.3 hPa | 0 | 0 |
| 1762326957 | 4.6 deg C | 89.2 % | 1026.3 hPa | 0 | 0 |
| 1762326057 | 4.4 deg C | 89.1 % | 1026.4 hPa | 0 | 0 |
| 1762325157 | 4.5 deg C | 88.7 % | 1026.4 hPa | 0 | 0 |
| 1762324257 | 4.5 deg C | 88.9 % | 1026.3 hPa | 0 | 0 |
| 1762323357 | 4.4 deg C | 89 % | 1026.4 hPa | 0 | 0 |
| 1762322457 | 4.7 deg C | 89.3 % | 1026.3 hPa | 0 | 0 |
| 1762321557 | 4.7 deg C | 89.7 % | 1026.4 hPa | 0 | 0 |
| 1762320657 | 4.7 deg C | 89.4 % | 1026.5 hPa | 0 | 0 |
| 1762319757 | 4.7 deg C | 89.5 % | 1026.6 hPa | 0 | 0 |
| 1762318857 | 4.8 deg C | 89.4 % | 1026.6 hPa | 0 | 0 |
| 1762317957 | 4.9 deg C | 89.7 % | 1026.8 hPa | 0 | 0 |
| 1762317057 | 4.8 deg C | 89.5 % | 1027 hPa | 0 | 0 |
| 1762316157 | 4.8 deg C | 89.6 % | 1027 hPa | 0 | 0 |
| 1762315257 | 4.9 deg C | 89.6 % | 1026.9 hPa | 0 | 0 |
| 1762314356 | 4.8 deg C | 90.2 % | 1027 hPa | 0 | 0 |
| 1762313456 | 4.9 deg C | 90.8 % | 1026.9 hPa | 0 | 0 |
| 1762312556 | 4.8 deg C | 91.3 % | 1027 hPa | 0 | 0 |
| 1762311656 | 4.7 deg C | 91.7 % | 1027 hPa | 0 | 0 |
| 1762310756 | 4.6 deg C | 91.3 % | 1027.1 hPa | 0 | 0 |
| 1762309856 | 4.5 deg C | 90.7 % | 1027.2 hPa | 0 | 0 |
| 1762308956 | 4.4 deg C | 89.9 % | 1027.2 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)