APRS Track Direct

My position About ☰

reset

9M2OCW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2OCW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1770094850	7 Pkt	10 Pkt	2 Pkt	-55 dBm	5.11 V
1770093924	3 Pkt	8 Pkt	1 Pkt	-55 dBm	5.11 V
1770092999	3 Pkt	9 Pkt	2 Pkt	-56 dBm	5.13 V
1770092074	7 Pkt	6 Pkt	0 Pkt	-53 dBm	5.13 V
1770091149	8 Pkt	4 Pkt	1 Pkt	-53 dBm	5.13 V
1770090223	10 Pkt	6 Pkt	0 Pkt	-53 dBm	5.13 V
1770089298	9 Pkt	7 Pkt	1 Pkt	-53 dBm	5.13 V
1770088373	11 Pkt	9 Pkt	0 Pkt	-53 dBm	5.11 V
1770087446	2 Pkt	7 Pkt	0 Pkt	-54 dBm	5.11 V
1770086521	2 Pkt	8 Pkt	0 Pkt	-53 dBm	5.13 V
1770085596	3 Pkt	7 Pkt	0 Pkt	-55 dBm	5.11 V
1770084672	4 Pkt	8 Pkt	0 Pkt	-53 dBm	5.13 V
1770083746	4 Pkt	9 Pkt	0 Pkt	-53 dBm	5.11 V
1770082821	3 Pkt	8 Pkt	0 Pkt	-55 dBm	5.11 V
1770081896	4 Pkt	7 Pkt	0 Pkt	-53 dBm	5.13 V
1770080971	4 Pkt	9 Pkt	0 Pkt	-53 dBm	5.11 V
1770080046	3 Pkt	9 Pkt	0 Pkt	-53 dBm	5.11 V
1770079121	5 Pkt	5 Pkt	0 Pkt	-53 dBm	5.13 V
1770078196	4 Pkt	8 Pkt	0 Pkt	-55 dBm	5.13 V
1770077271	2 Pkt	6 Pkt	0 Pkt	-55 dBm	5.13 V
1770076346	2 Pkt	6 Pkt	0 Pkt	-55 dBm	5.13 V
1770075421	12 Pkt	4 Pkt	0 Pkt	-54 dBm	5.13 V
1770074496	11 Pkt	6 Pkt	0 Pkt	-55 dBm	5.11 V
1770073570	5 Pkt	6 Pkt	0 Pkt	-53 dBm	5.13 V
1770072646	3 Pkt	6 Pkt	0 Pkt	-55 dBm	5.13 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)