APRS Track Direct

My position About ☰

reset

KK4NTX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4NTX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1778044532	209 Pkts	207 Pkts	102 Pkts	34 C
1778040932	246 Pkts	244 Pkts	120 Pkts	34 C
1778037334	207 Pkts	204 Pkts	90 Pkts	34 C
1778033732	198 Pkts	197 Pkts	108 Pkts	34 C
1778030132	260 Pkts	259 Pkts	127 Pkts	35 C
1778026532	261 Pkts	258 Pkts	127 Pkts	35 C
1778022932	279 Pkts	278 Pkts	141 Pkts	34 C
1778019332	291 Pkts	289 Pkts	146 Pkts	34 C
1778015732	280 Pkts	279 Pkts	143 Pkts	34 C
1778012132	304 Pkts	301 Pkts	152 Pkts	34 C
1778008532	296 Pkts	293 Pkts	148 Pkts	34 C
1778004932	255 Pkts	254 Pkts	139 Pkts	33 C
1778001332	239 Pkts	239 Pkts	126 Pkts	33 C
1777997732	293 Pkts	291 Pkts	141 Pkts	33 C
1777994132	240 Pkts	239 Pkts	122 Pkts	32 C
1777990532	241 Pkts	241 Pkts	114 Pkts	32 C
1777986932	222 Pkts	221 Pkts	102 Pkts	32 C
1777983332	178 Pkts	177 Pkts	89 Pkts	32 C
1777979732	224 Pkts	224 Pkts	108 Pkts	32 C
1777976132	193 Pkts	192 Pkts	98 Pkts	32 C
1777972532	191 Pkts	188 Pkts	89 Pkts	32 C
1777968932	197 Pkts	196 Pkts	116 Pkts	32 C
1777965332	214 Pkts	212 Pkts	115 Pkts	32 C
1777961732	207 Pkts	205 Pkts	113 Pkts	32 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)