This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786731063 | 30 | 22 | 942 | 0 | 0 |
| 1786730463 | 30 | 22 | 942 | 0 | 0 |
| 1786729862 | 30 | 21 | 942 | 0 | 0 |
| 1786729262 | 30 | 21 | 942 | 0 | 0 |
| 1786728662 | 30 | 21 | 942 | 0 | 0 |
| 1786728062 | 30 | 21 | 941 | 0 | 0 |
| 1786727462 | 30 | 20 | 940 | 0 | 0 |
| 1786726862 | 30 | 21 | 940 | 0 | 0 |
| 1786726262 | 30 | 20 | 940 | 0 | 0 |
| 1786725662 | 30 | 20 | 940 | 0 | 0 |
| 1786725062 | 30 | 21 | 940 | 0 | 0 |
| 1786724461 | 29 | 21 | 940 | 0 | 0 |
| 1786723861 | 29 | 21 | 940 | 0 | 0 |
| 1786723261 | 29 | 21 | 940 | 0 | 0 |
| 1786722660 | 29 | 21 | 940 | 0 | 0 |
| 1786722061 | 29 | 22 | 941 | 0 | 0 |
| 1786721461 | 29 | 22 | 941 | 0 | 0 |
| 1786720860 | 29 | 22 | 941 | 0 | 0 |
| 1786720260 | 29 | 22 | 941 | 0 | 0 |
| 1786719660 | 29 | 22 | 941 | 0 | 0 |
| 1786719059 | 29 | 22 | 941 | 0 | 0 |
| 1786718459 | 29 | 22 | 941 | 0 | 0 |
| 1786717859 | 29 | 22 | 942 | 0 | 0 |
| 1786717259 | 29 | 22 | 942 | 0 | 0 |
| 1786716659 | 29 | 22 | 942 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)