This is the latest recevied telemetry packets stored in our database for station/object VK7RC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274793 | 409 | 603 | 0 | 0 | 0 |
| 1836274614 | 409 | 603 | 0 | 0 | 0 |
| 1836274581 | 408 | 603 | 0 | 0 | 0 |
| 1836274520 | 408 | 603 | 0 | 0 | 0 |
| 1836274461 | 409 | 603 | 0 | 0 | 0 |
| 1836274435 | 409 | 604 | 0 | 0 | 0 |
| 1836274341 | 409 | 603 | 0 | 0 | 0 |
| 1836274315 | 409 | 604 | 0 | 0 | 0 |
| 1836274281 | 408 | 603 | 0 | 0 | 0 |
| 1836274077 | 409 | 604 | 0 | 0 | 0 |
| 1836274017 | 409 | 604 | 0 | 0 | 0 |
| 1836273957 | 409 | 604 | 0 | 0 | 0 |
| 1762373828 | 401 | 592 | 0 | 0 | 0 |
| 1762373708 | 401 | 593 | 0 | 0 | 0 |
| 1762373469 | 401 | 592 | 0 | 0 | 0 |
| 1762373410 | 401 | 593 | 0 | 0 | 0 |
| 1762373349 | 401 | 593 | 0 | 0 | 0 |
| 1762373290 | 401 | 593 | 0 | 0 | 0 |
| 1762372991 | 401 | 592 | 0 | 0 | 0 |
| 1762372932 | 401 | 592 | 0 | 0 | 0 |
| 1762372634 | 401 | 592 | 0 | 0 | 0 |
| 1762372454 | 401 | 592 | 0 | 0 | 0 |
| 1762372395 | 401 | 593 | 0 | 0 | 0 |
| 1762372157 | 404 | 594 | 0 | 0 | 0 |
| 1762372037 | 401 | 593 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)