This is the latest recevied telemetry packets stored in our database for station/object W4BJB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794908711 | 396 | 584 | 0 | 0 | 0 |
| 1794906918 | 397 | 584 | 0 | 0 | 0 |
| 1794905124 | 397 | 585 | 0 | 0 | 0 |
| 1794903331 | 397 | 586 | 0 | 0 | 0 |
| 1794899744 | 397 | 587 | 0 | 0 | 0 |
| 1794897951 | 397 | 587 | 0 | 0 | 0 |
| 1794896158 | 398 | 587 | 0 | 0 | 0 |
| 1794894364 | 397 | 588 | 0 | 0 | 0 |
| 1794892572 | 397 | 589 | 0 | 0 | 0 |
| 1794890778 | 397 | 590 | 0 | 0 | 0 |
| 1794888985 | 397 | 591 | 0 | 0 | 0 |
| 1794887191 | 399 | 592 | 0 | 0 | 0 |
| 1794885398 | 398 | 594 | 0 | 0 | 0 |
| 1794883606 | 398 | 594 | 0 | 0 | 0 |
| 1794880019 | 398 | 596 | 0 | 0 | 0 |
| 1794876433 | 399 | 599 | 0 | 0 | 0 |
| 1794874640 | 400 | 600 | 0 | 0 | 0 |
| 1794871053 | 399 | 603 | 0 | 0 | 0 |
| 1794869260 | 399 | 603 | 0 | 0 | 0 |
| 1794865673 | 399 | 603 | 0 | 0 | 0 |
| 1794863880 | 399 | 602 | 0 | 0 | 0 |
| 1794860293 | 401 | 599 | 0 | 0 | 0 |
| 1794858500 | 400 | 600 | 0 | 0 | 0 |
| 1794856706 | 400 | 596 | 0 | 0 | 0 |
| 1794854912 | 400 | 595 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)