This is the latest recevied telemetry packets stored in our database for station/object OE3CZC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1794902857 | 981.7 hPa | 28.5 C deg | 34.5 % | 1000.5 hPa | 0 C deg |
| 1794901042 | 982.2 hPa | 28.6 C deg | 34.3 % | 1001 hPa | 0 C deg |
| 1794899226 | 982.3 hPa | 28.6 C deg | 34.3 % | 1001.2 hPa | 0 C deg |
| 1794897411 | 982.5 hPa | 28.6 C deg | 34.3 % | 1001.3 hPa | 0 C deg |
| 1794895596 | 982.7 hPa | 28.7 C deg | 34.2 % | 1001.5 hPa | 0 C deg |
| 1794893781 | 983.3 hPa | 28.7 C deg | 34.1 % | 1002.1 hPa | 0 C deg |
| 1794891966 | 983.5 hPa | 28.7 C deg | 34.2 % | 1002.4 hPa | 0 C deg |
| 1794890151 | 983.8 hPa | 28.6 C deg | 34.3 % | 1002.6 hPa | 0 C deg |
| 1794888336 | 984.7 hPa | 28.6 C deg | 34.3 % | 1003.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)