This is the latest recevied telemetry packets stored in our database for station/object IZ0FKE-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | TMP* | RAM* | PNG* | Value5* |
|---|---|---|---|---|---|
| 1774100041 | 15 % | 0 C | 9 % | 62 ms | 0 None |
| 1774099439 | 22 % | 0 C | 9 % | 62 ms | 0 None |
| 1774098838 | 15 % | 0 C | 9 % | 69 ms | 0 None |
| 1774098236 | 17 % | 0 C | 9 % | 76 ms | 0 None |
| 1774097635 | 15 % | 0 C | 9 % | 78 ms | 0 None |
| 1774097034 | 18 % | 0 C | 9 % | 68 ms | 0 None |
| 1774096432 | 16 % | 0 C | 9 % | 78 ms | 0 None |
| 1774095831 | 19 % | 0 C | 9 % | 71 ms | 0 None |
| 1774095230 | 16 % | 0 C | 9 % | 62 ms | 0 None |
| 1774094629 | 15 % | 0 C | 9 % | 66 ms | 0 None |
| 1774094027 | 18 % | 0 C | 9 % | 71 ms | 0 None |
| 1774093426 | 13 % | 0 C | 9 % | 77 ms | 0 None |
| 1774092825 | 14 % | 0 C | 9 % | 77 ms | 0 None |
| 1774092223 | 16 % | 0 C | 9 % | 72 ms | 0 None |
| 1774091622 | 12 % | 0 C | 8 % | 72 ms | 0 None |
| 1774091021 | 17 % | 0 C | 8 % | 70 ms | 0 None |
| 1774090420 | 53 % | 0 C | 6 % | 69 ms | 0 None |
| 1774090017 | 16 % | 0 C | 11 % | 46 ms | 0 None |
| 1774089416 | 15 % | 0 C | 11 % | 44 ms | 0 None |
| 1774088815 | 17 % | 0 C | 11 % | 53 ms | 0 None |
| 1774088214 | 15 % | 0 C | 11 % | 47 ms | 0 None |
| 1774087613 | 17 % | 0 C | 11 % | 53 ms | 0 None |
| 1774087011 | 17 % | 0 C | 11 % | 54 ms | 0 None |
| 1774086410 | 16 % | 0 C | 11 % | 48 ms | 0 None |
| 1774085809 | 17 % | 0 C | 11 % | 54 ms | 0 None |
*Used Equation Coefficients:
CPU: 0, 1, 0
TMP: 0, 1, 0
RAM: 0, 1, 0
PNG: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)