This is the latest recevied telemetry packets stored in our database for station/object EA3ICF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff* |
|---|---|---|---|---|---|
| 1794909224 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794908924 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794908624 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794908324 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794908024 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794907724 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794907424 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794907124 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794906824 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794906524 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794906224 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794905924 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794905624 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794905324 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794905024 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794904724 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794904424 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794904124 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794903824 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794903524 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794903224 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794902924 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794902624 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794902324 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
| 1794902024 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pcnt | 100 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)