This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | I_Ext* | P_Ext* | T_Ext* |
|---|---|---|---|---|---|
| 1790636735 | 4.1 VDC | 11.8 VDC | -810 mA | 2.1 W | 4 °C |
| 1790636435 | 4.1 VDC | 11.8 VDC | -760 mA | 2.7 W | 4 °C |
| 1790636133 | 4.1 VDC | 11.8 VDC | -800 mA | 2 W | 4 °C |
| 1790635832 | 4.1 VDC | 11.8 VDC | -830 mA | 2 W | 4 °C |
| 1790635528 | 4.1 VDC | 11.8 VDC | -790 mA | 2.1 W | 5 °C |
| 1790635228 | 4.1 VDC | 11.8 VDC | -730 mA | 2.5 W | 4 °C |
| 1790634928 | 4.1 VDC | 11.8 VDC | -830 mA | 1.8 W | 4 °C |
| 1790634627 | 4.1 VDC | 11.8 VDC | -820 mA | 2.4 W | 4 °C |
| 1790634326 | 4.1 VDC | 11.8 VDC | -810 mA | 2.2 W | 4 °C |
| 1790634026 | 4.1 VDC | 11.8 VDC | -850 mA | 1.7 W | 4 °C |
| 1790633725 | 4.1 VDC | 11.8 VDC | -880 mA | 1.5 W | 4 °C |
| 1790633425 | 4.1 VDC | 11.8 VDC | -870 mA | 1.5 W | 4 °C |
| 1790633122 | 4 VDC | 11.8 VDC | -890 mA | 1.3 W | 4 °C |
| 1790632821 | 4.1 VDC | 11.8 VDC | -880 mA | 1.4 W | 4 °C |
| 1790632521 | 4.1 VDC | 11.8 VDC | -880 mA | 2.2 W | 4 °C |
| 1790632220 | 4.1 VDC | 11.8 VDC | -900 mA | 1.4 W | 4 °C |
| 1790631920 | 4.1 VDC | 11.8 VDC | -870 mA | 1.3 W | 4 °C |
| 1790631620 | 4.1 VDC | 11.8 VDC | -850 mA | 1.5 W | 4 °C |
| 1790631318 | 4.1 VDC | 11.8 VDC | -840 mA | 2.1 W | 3 °C |
| 1790631017 | 4.1 VDC | 11.8 VDC | -870 mA | 1.6 W | 4 °C |
| 1790630717 | 4.1 VDC | 11.8 VDC | -870 mA | 1.6 W | 3 °C |
| 1790630416 | 4.1 VDC | 11.8 VDC | -870 mA | 1.5 W | 4 °C |
| 1790630116 | 4.1 VDC | 11.9 VDC | -870 mA | 1.9 W | 4 °C |
| 1790629816 | 4.1 VDC | 11.9 VDC | -890 mA | 1.4 W | 4 °C |
| 1790629515 | 4.1 VDC | 11.8 VDC | -840 mA | 2.1 W | 4 °C |
*Used Equation Coefficients:
V_Batt: 0, 0.1, 0
V_Ext: 0, 0.1, 0
I_Ext: 0, 10, -2000
P_Ext: 0, 0.1, -10
T_Ext: 0, 1, -100
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)