This is the latest recevied telemetry packets stored in our database for station/object W1KU-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Btemp* | Mtemp* | Utemp* | Xtemp* | Batt* |
|---|---|---|---|---|---|
| 1766204853 | 67 deg.F | 58 deg.F | 55 deg.F | 86 deg.F | 100 pct |
| 1766200707 | 67 deg.F | 58 deg.F | 55 deg.F | 86 deg.F | 100 pct |
| 1766199331 | 67 deg.F | 58 deg.F | 54 deg.F | 86 deg.F | 100 pct |
| 1766197948 | 67 deg.F | 58 deg.F | 55 deg.F | 86 deg.F | 100 pct |
| 1766192434 | 67 deg.F | 58 deg.F | 55 deg.F | 0 deg.F | 100 pct |
| 1766182770 | 66 deg.F | 58 deg.F | 55 deg.F | 0 deg.F | 100 pct |
| 1766173110 | 67 deg.F | 58 deg.F | 55 deg.F | 86 deg.F | 100 pct |
| 1766171732 | 67 deg.F | 58 deg.F | 55 deg.F | 86 deg.F | 100 pct |
| 1766170346 | 67 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
| 1766155169 | 66 deg.F | 58 deg.F | 54 deg.F | 85 deg.F | 100 pct |
| 1766149646 | 66 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
| 1766141367 | 66 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
| 1766135853 | 66 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
| 1766134469 | 66 deg.F | 58 deg.F | 54 deg.F | 85 deg.F | 100 pct |
| 1766133091 | 66 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
| 1766131712 | 66 deg.F | 58 deg.F | 55 deg.F | 0 deg.F | 100 pct |
| 1766130334 | 66 deg.F | 58 deg.F | 55 deg.F | 0 deg.F | 100 pct |
| 1766124806 | 66 deg.F | 58 deg.F | 55 deg.F | 85 deg.F | 100 pct |
*Used Equation Coefficients:
Btemp: 0, 1, 0
Mtemp: 0, 1, 0
Utemp: 0, 1, 0
Xtemp: 0, 1, 0
Batt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)