This is the latest recevied telemetry packets stored in our database for station/object SA3VCC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | Bat* | CpuTemp* | CpuHum* | Lux* |
|---|---|---|---|---|---|
| 1792150676 | 4.43 V | 0 % | 19.8 C | 63.7 % | 6125 lx |
| 1792146857 | 4.42 V | 0 % | 29 C | 53.7 % | 12871 lx |
| 1792143038 | 4.41 V | 0 % | 32.1 C | 53.9 % | 13315 lx |
| 1792140491 | 4.41 V | 0 % | 32.1 C | 49.4 % | 12078 lx |
| 1792139218 | 4.43 V | 0 % | 24.1 C | 56.1 % | 11630 lx |
| 1792135399 | 4.42 V | 0 % | 18.3 C | 57.3 % | 5649 lx |
| 1792134126 | 4.42 V | 0 % | 13.8 C | 62 % | 3340 lx |
| 1792132853 | 4.41 V | 0 % | 12.2 C | 63.8 % | 1885 lx |
*Used Equation Coefficients:
VBat: 0, 0.01, 2.5
Bat: 0, 1, 0
CpuTemp: 0, 0.1, 0
CpuHum: 0, 0.1, 0
Lux: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)