APRS Track Direct

My position About ☰

reset

E22KKC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1778036094	56 Pkt	0 Pkt	0 Pkt	-51 dBm	0.49 V
1778034267	64 Pkt	0 Pkt	0 Pkt	-50 dBm	2.95 V
1778032440	59 Pkt	1 Pkt	0 Pkt	-51 dBm	0.62 V
1778030612	58 Pkt	0 Pkt	0 Pkt	-50 dBm	0.86 V
1778028785	40 Pkt	0 Pkt	0 Pkt	-49 dBm	1.03 V
1778026958	42 Pkt	1 Pkt	2 Pkt	-51 dBm	1.05 V
1778025131	56 Pkt	0 Pkt	1 Pkt	-50 dBm	0.82 V
1778023304	58 Pkt	0 Pkt	2 Pkt	-49 dBm	0.68 V
1778021477	61 Pkt	0 Pkt	1 Pkt	-50 dBm	0.68 V
1778019649	51 Pkt	0 Pkt	0 Pkt	-48 dBm	0.98 V
1778017822	60 Pkt	0 Pkt	0 Pkt	-47 dBm	0.66 V
1778015994	57 Pkt	0 Pkt	2 Pkt	-49 dBm	1.03 V
1778014166	47 Pkt	0 Pkt	0 Pkt	-48 dBm	0.98 V
1778012340	62 Pkt	0 Pkt	3 Pkt	-49 dBm	0.74 V
1778010511	64 Pkt	0 Pkt	0 Pkt	-48 dBm	0.7 V
1778008684	52 Pkt	0 Pkt	1 Pkt	-48 dBm	1.05 V
1778006856	61 Pkt	1 Pkt	0 Pkt	-46 dBm	0.82 V
1778005029	56 Pkt	0 Pkt	2 Pkt	-49 dBm	2.87 V
1778003203	50 Pkt	0 Pkt	1 Pkt	-48 dBm	0.94 V
1778001376	54 Pkt	0 Pkt	2 Pkt	-48 dBm	0.76 V
1777999548	0 Pkt	0 Pkt	0 Pkt	-51 dBm	0.82 V
1777998077	58 Pkt	0 Pkt	2 Pkt	-51 dBm	0.66 V
1777996250	55 Pkt	0 Pkt	0 Pkt	-51 dBm	0.76 V
1777994422	51 Pkt	0 Pkt	0 Pkt	-49 dBm	0.66 V
1777992595	56 Pkt	0 Pkt	1 Pkt	-51 dBm	0.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)